Brother FAX 1570 MC User Manual
Page 23
15
I N S T A L L A T I O N
Do not connect a TAD elsewhere on the same phone line—your FAX/MFC and
TAD will both try to control the line.
Connections
The external TAD must be plugged into the left side of the FAX/MFC, into the jack labeled
EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall jack.
1
Plug the telephone line cord from the wall jack into the left side of the FAX/
MFC, in the jack labeled LINE.
2
Plug the telephone line cord from your TAD into the left side of the FAX/MFC,
in the jack labeled EXT. (Make sure this cord is connected to the TAD at the
TAD’s telephone line jack, and not its telephone set jack.)
3
Set your external TAD to 4 rings or less. (The FAX/MFC’s Ring Delay setting
does not apply).
4
Record the outgoing message (see below).
5
Set the TAD to answer calls.
6
Set Message Storage (
Function
,
8
,
1
) to VOICE:EXT..
7
Set the Answer Mode to MC:MSG CTR.