Warning, Aintenance and care 17, Filter – Bissell 9500 User Manual

Page 17: Peration

Advertising
background image

Hard floor cleaning (continued)

11. Allow adequate time for floors to dry.

12. Remove hard floor tool, rinse and dry before storing.

13. If any formula remains in the formula tank,

pour it back into the Hard Floor Solutions

bottle for use the next time.

14

.

Rinse out the formula tank.

Machine storage

Once your cleaning is complete, make sure

the 2-in-1 water tank is emptied, rinsed out,

and dried before the next use. The formula

tank can remain filled and ready to go, or it

can simply be emptied back into the formula

bottle if that is more convenient.

Note: Store cleaner in a protected, dry area.

Since this product uses water, it must not be

stored where there is a danger of freezing.

Freezing will damage internal components

and void the warranty.

Machine care

For best results, a few simple steps can assure

your machine is well maintained after your

cleaning is complete.
1.
Turn power and heater switches OFF (O).

Unplug the machine and wrap the power cord.

2. After emptying the 2-in-1 water tank, rinse

it out at a faucet with running hot tap water,

taking care to clean underneath the heavy

duty bladder, and all around it.

3. The top half of the tank can be rinsed clean

through the nozzle area. Also, pop out the red

filter underneath the top half of the tank and

rinse that out. Replace before putting the top

and bottom halves of the tank together.

4. Before you place the cleaned 2-in-1 water tank

back onto the machine, simply unscrew the floor

nozzle using a Phillips head screwdriver. This

can be rinsed out at the faucet. Then replace

back onto the machine by starting from the

bottom of the nozzle and hooking the tabs into

the holes on the bottom sides of the machine.

Secure into place with the screw.

WARNING:

To reduce the risk of fire,

electric shock or injury

unplug from outlet before

servicing.

M

aintenance and care

17

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Filter

Tip:

Let all parts dry completely

before storing

3.

O

peration

ug120-4080_7350_908.indd 17

10/14/08 1:24:53 PM

Advertising