Caution, Service and repair – Bosch BOSCH Dryer User Manual

Page 27

Advertising
background image

25

Problem

Possible cause

Remedial action

Degree of drying has not been reached

or the drying time is too long.

Lint filter dirty.

Clean filter as described on page 23.

Switch off/switch on again.

y g

g

Display may indicate E:03".

Laundry was too wet.

Spin laundry at higher speed in the washing

machine. Switch off/switch on again.

Unsuitable program selected.

Select program with aid of the program selection

table (see page 19). Switch off/switch on again.

Maximum drying time was exceeded.

Clean lint filter (see page 23).

Check exhaust air extraction.

Spin laundry at a higher speed in your washer.

Motor limit temperature was exceeded.

Switch off dryer, leave to cool down for 30 min.

Switch on again. Start program.

Drum light does not function.

No program selected.

Select program.

g

Liightbulb defective, lightbulb burned out.

Change light bulb, see page 24.

No power supply.

Guarantee power supply.

Start/Stop" indicator light does not

illuminate. Lint filter" indicator light

flashes wrinkle block/finished"

Fault in program sequence or malfunction.

Switch off dryer, leave to cool down for 30 min,

switch on again.

Restart program

flashes. wrinkle block/finished"

indicator lights.

The display shows 000".

Restart program.

SERVICE and REPAIR

d

CAUTION

d

CAUTION - Label all wires prior

to disconnection when servicing

controls. Wiring errors can cause

improper and dangerous

operation. verify proper

operation after servicing.

The Bosch dryers require no special

care other than the care and

cleaning noted above.

i

If you are having a problem with

your dryer, before calling for

service please refer to Table on

page 24, following.

If service becomes necessary,

contact your dealer or installer or an

authorized service center. Do not

attempt to repair the appliance

yourself. Any work performed by

unauthorized personnel may void

the warranty.

If you are having a problem with

your Bosch dryer and are not

pleased with the service you have

received:
- First, please contact your

installer or the Bosch

Authorized Service Contractor

in your area and explain to

them why you are not satisfied.

This will usually correct the

problem.

- If after working with your

installer or service person the

problem still has not been

resolved to your satisfaction,

please let us know by either

writing to us at,
BSH Home Appliances

5551 Mc Fadden Avenue

Huntington Beach, CA 92649

or, calling us at

1Ć800Ć944Ć2904.

Please be sure to include, if writing,

or have available, if calling, the

following information:
- Model Number
- Serial Number
- Date of Original Purchase
- Date Problem Originated
- Explanation of Problem
Also, if writing, please be sure to

include a daytime telephone

number and a copy of the sales

invoice.
You will find the model number and

serial number information on the

rating plate located on the inside of

the front panel.

Advertising