Brinkmann Grill King DeLuxe Heavy-Duty Outdoor Charcoal Grill & Smoker - Manual (Page 5)

4
Choose a good, cleared assembly area and get a
friend to help you put your grill together. Lay
cardboard down to protect grill finish and
assembly area.
Step 1
Align the bolt holes in the legs with axle holes
to bolt holes in the body. Insert two M6 x 50
bolts through each leg and secure
(hand tighten only at this point).
Step 2
With the help of a friend, turn the body on its
other side. Align the bolt holes in the legs
without axle holes to bolt holes in the body.
Insert two M6 x 50 bolts through each leg and
secure (hand tighten only at this point).
Step 3
Insert casters directly into holes in bottom of
legs without axle holes.
Step 4
Insert axle through axle holes in legs. Place
wheels on axles with recessed hubs facing out.
Insert wheel cap through center of wheel to
secure the wheel to the axle. Push until secure.
Air
Vent
Legs Without Axle Holes
Legs with Axle
Holes
Push Cap
Casters
Legs