Bosch D1260 User Manual
Page 59
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
Bosch Security Systems | 9/04 | 50410D
59
5.
If the card is accepted, the display changes to
either
Card added.
or
Card changed
if the card
already exists in your system.
Pressing the
<Exit
soft key exits out of this
function and returns the display to idle text.
Pressing the
Next>
soft key exits out of this
function and returns the display to either
Add/Change Level.
Add/Change Sub-User ID
For each user in the system, there can be up to four
access cards; one Master User (assigned in the
Card>
prompt) and up to three sub-users.
1.
Pressing the
Sub-User>
soft key will allow you to
add/change a user’s Sub-User access card or
credential.
2.
The display changes to
User 123 Add/Change
Sub-User IDs?
to add or change any of this user’s
sub-user IDs.
Pressing the
Yes>
soft key will jump to Step 3.
Pressing the
No>
soft key will jump to
Add/Change Passcode.
3.
The display changes to
Select Sub-User:
Press the
<Sub-User 1
soft key to add or change
sub-user 1.
Press the
<Sub-User 2
soft key to add or change
sub-user 2.
Press the
<Sub-User 3
soft key to add or change
sub-user 3.
Press the
Exit>
soft key to return to the main
Add
/ Change User
display.
4.
If adding or changing a sub-user and a card reader
is connected to your system, the display changes to
Add
(or
Change
)
Sub-User 1: Present card to
card reader now.
If the display changes to
D9210 not ready
, contact
your security company.
If 20 seconds elapse without pressing a key the
display returns to idle text. Pressing the
<Exit
soft
key exits out of this function and returns the
display to the main
Add / Change User
display.