Bosch D1260 - Manual (Page 64)

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SERVICE MENU ? (9 + 9 + Enter)
64 Bosch Security Systems | 9/04 | 50410D
Using View Log
1. Press the View Log ?> soft key.
2. The display changes to Enter start date:
Press the Go to last event> soft key to go to the
last event in the log.
Press the
<Exit soft key to exit this function and
return to idle text.
3. Enter the start date in the form of mm/dd.
For example, to enter 7/14 as the start date, press 0
+ 7 + 1 + 4
Once you start entering digits, the Go to last
event> soft key is replaced with the Enter> soft
key.
Press the <Exit soft key to exit this function and
return to idle text.
4. Press either the Enter> soft key or the ENTER
button.
5. If the date entered is valid, the first event for that
date will appear.
Press the <Exit soft key to exit this function and
return to idle text.
If the date entered is invalid (there are no events
with that date in the log), it will display the next
latest event in the log.
Press the <Exit soft key to exit this function and
return to idle text.
6. The display will show one of two ways depending
on if the date entered was for an event first in the
log or not.
•
If the date was for the first event in the log, it
will display the next latest event in the log.
•
If the date was for an event (not the first) in the
log, the display will be the same except the
<Previous soft key has been added.
Press the <Exit soft key to exit this function and
return to idle text.
7. Press the Next> soft key to go to the next event in
the log.
If there are no more events in the log, *End of
Log* will appear.
Press the <Previous soft key to go to the previous
event in the log.
Press the
<Exit soft key to exit this function and
return to idle text.