Billion Electric Company BiGuard 30 - Manual (Page 89)

89
Name: Please input the name of the rule.
IP Address: Please input the additional WAN IP address you would like to use.
Interface: Please select the WAN Interface that you would like to add the additional
WAN IP to.
Click the Apply button to add the configuration into the WAN IP Alias.
4.4.3 Dual WAN
In this section, you can setup the fail over or load balance function, outbound load
balance or inbound load balance function, or setup specific protocol to bind with
specific WAN port. In this menu are the following sections: General Settings,
Outbound Load Balance, Inbound Load Balance, and Protocol Binding.
4.4.3.1 General Settings