Brother PE 400D - Manual (Page 108)

105
This message will appear
if you press the “START/
STOP” button while the
foot controller is attached.
This message is dis-
played if a non-buttonhole
pattern is selected and
the “START/STOP” button
or “REVERSE STITCH”
button is pressed while
the buttonhole lever is
lowered.
This message is dis-
played if a buttonhole pat-
tern is selected and the
“START/STOP” button or
“REVERSE STITCH” but-
ton is pressed while the
buttonhole lever is raised.
This message will appear
if you press “
” key
to restore a pattern that
has not been saved to
memory.
This message will appear
during embroidery mode
if you have combined a
group of characters to-
gether that extend beyond
the boundary of the em-
broidery hoop.
This message is dis-
played when “START/
STOP” button or “RE-
VERSE STITCH” button
are pressed, while no pat-
tern has been selected.
This message is dis-
played if the frame pattern
for embroidering has not
been completely input,
and when the “START/
STOP” button is pressed
when in editing mode.
Instruction messages
This message is dis-
played while a pattern is
being saved into memory.
This message is dis-
played during bobbin
winding.
This message is dis-
played while the embroi-
dery unit is initializing.
Alarms
Proper operation: One beep
Incorrect operation: Two or four beeps