Utility stitches, Straight stitches – Brother PE 400D User Manual
Page 39
36
STRAIGHT STITCHES
1 Straight (Left)
2 Straight (Mid dle)
UTILITY STITCHES
1
2
J
1. Attach the J f oot. Handle thread and fabric with y our left hand
while tur ning the balance wheel with the r ight. Pierce the nee-
dle through the f abric as shown.
3
5
3
5
4. Raise the presser foot, remo ve the fabric and cut the thread.
2. Lower the presser f oot. While pressing the re verse stitch b ut-
ton, sew 3-4 stitches in re verse to make a reinforcement stitch.
Then release the “REVERSE STITCH” button and press the
“START/ST OP” button to begin se wing.
1 Reinforcement stitch (3-4 stitches)
3. At the end of a seam, press the “REVERSE STITCH” button
again to sew another reinf orcement stitch.
*
Reverse stitches are sewn while the “REVERSE STITCH”
button is pressed.
*
Sewing in reverse is carried out at a slo w sewing speed.