Presser foot – Brother PE 400D User Manual

Page 34

Advertising
background image

31

CAUTION
Always make sure to turn the machine off and unplug it when changing presser feet. If the power
accidentally comes on, the machine might start running and bodily injury could result.

1. Push the “NEEDLE POSITION” button to raise the needle,

and then turn off the power.

2. Raise the presser foot lever.

3. Press the black button located at the back of the presser foot

holder to release the foot.

1 Presser foot holder

4. Place the presser foot pin directly below the holder-end and

lower the presser foot lever to attach the presser foot.

1 Holder-end
2 Foot pin

PRESSER FOOT

Changing the presser foot

Advertising