Brother Copier/Printer MFC-9970CDW - Manual (Page 120)

104
Registration
failed
Registration failed. Do one of the following:
 Turn off the machine’s power switch. Wait
a few seconds, then turn it on again.
 Try Manual Registration, MENU, Printer,
Manual Regist.
. (See Manual
Registration in Appendix A of the
Advanced User's Guide.)
 Put in a new belt unit. (See Replacing the
belt unit on page 86.)
 If the problem continues, call Brother
Customer Service.
Rename the File
There is already a file on the
USB Flash memory drive with
the same name as the file you
are trying to save. Change the name of the file on the USB Flash
memory drive or the file you are trying to save.
Replace Parts
Belt Unit
It is time to replace the belt unit. Replace the belt unit. (See Replacing the belt
unit on page 86.)
Replace Parts
Drum Unit
It is time to replace the drum
unit. Replace the drum unit.
(See Replacing the drum unit on page 80.)
The drum unit counter was not
reset when a new drum was
installed. Reset the drum unit counter.
(See Resetting the drum counter
on page 86.)
Replace Parts
Fuser Unit
It is time to replace the fuser
unit. Call Brother Customer Service or a Brother
Authorized Service Center to replace the
fuser unit.
To replace Fuser Unit call Brother Customer
Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
1-877-BROTHER (in Canada)
or to locate a Brother Authorized Service
Center, visit us at:
http://www.brother-usa.com/service/
Error Message Cause Action