Brother HL 4150CDN - Manual (Page 69)

Control Panel
63
3
Buttons
3
You can control the basic machine operations and change various printer settings with seven buttons (Go,
Cancel, Secure, +, -, Back, OK).
Go
3
You can pause printing by pressing Go. Pressing Go again restarts the print job. During a pause, the machine
is offline.
Pressing Go allows you to choose the displayed option in the last menu level. After changing a setting, the
machine returns to the Ready state.
If Data remains in the machine memory, pressing Go will print that remaining data.
You can clear some error indications by pressing Go. Follow the control panel instructions or see
Troubleshooting on page 139 to clear all other errors.
You can switch to Reprint mode by pressing Go and holding it down for about 4 seconds. (For details, see
Reprinting documents on page 68.)
Note
• The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk
shows what you have chosen, you can easily see the current settings as you look through the LCD.
• If the machine is in Pause mode and you do not want to print the data left, press Cancel. Once the job has
been canceled, the machine will return to the Ready state.
button Operations
Go Clear error messages.
Pause and continue printing.
Switch to Reprint mode.
Cancel Stop and cancel the printing job in progress.
Exit from the control panel menu, Reprint menu, Secure Print menu, or Direct Print
menu.
Secure Choose the Secure Print menu.
+ Scroll backward through menus and the available options.
Enter numbers and increase the number.
- Scroll forward through menus and the available options.
Enter numbers and decrease the number.
Back Go back one level in the menu structure.
OK Choose the control panel menu.
Set the chosen menus and settings.