Brother HL 4150CDN - Manual (Page 81)

Control Panel
75
3
Network for HL-4150CDN users
3
1 ### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
Submenu Menu Selections Options Descriptions
TCP/IP Boot Method Auto
*/Static/RARP/
BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
* 1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
* 1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
* 1
Enter the Gateway address.
IP Boot Tries 0
/1/2/3*.../32767 Specifies the number of setting trials
when the Boot Method allows
automatic IP setting.
APIPA On
*/Off Automatically allocates the IP
address from the link-local address
range.
1
IPv6 Off
*/On Sets use of IPv6 protocol.
Ethernet Auto
*/100B-FD/100B-HD/
10B-FD
/10B-HD
Chooses Ethernet link mode.
Status Active 100B-FD
/
Active 100B-HD
/
Active 10B-FD
/
Active 10B-HD
/
Inactive
Shows Ethernet link status.
MAC Address
Shows MAC address of the machine.
Network Reset
Restores all network settings of the internal print server to the factory default.
The factory settings are shown in Bold with an asterisk.