Philips 32PFL3506H-12 - Manual (Page 32)

28
C: Check for updates through digital
broadcasts
You can check if there are updates available
through digital broadcasts.
1
Press .
2
Select [Setup] > [Software settings] >
[Check on major updates].
3
If an update is available, follow the on-
screen instructions to start the update.
» The TV restarts after the software
update is complete.
Step 3: Update the TV software
1
Connect your USB storage device to the
TV.
» The TV detects the USB flash drive and
starts to scan for software version.
2
If a message prompts you to update the
software, follow the on-screen instructions
to update the TV software.
3
If the message is not displayed, continue
with the following steps:
4
Press .
5
Select [Setup] > [Software settings] >
[Local updates].
6
Select the file that you downloaded, then
press OK to update the TV software
manually.
7
Follow the on-screen instructions to
complete the update.
8
To exit, press .
B: Update when prompted through
digital broadcasts
If you receive digital broadcasts (DVB-T), your
TV can automatically receive software updates.
When your TV receives a software update, it
will prompt you to update the TV software.
1
Press .
2
Select [Setup] > [Software settings] >
[Announcement] .
3
If a message appears to prompt you
to update your software, follow the
instructions to start the update.
» The TV restarts after the software
update is complete.
4
If you do not want to update the software,
select [Setup] > [Software settings] >
[Clear announcement], then press OK.
Note
• If you skip the update, you can update it manually later
(see ‘C: Check for updates through digital broadcasts’
on page 28).
EN