Philips 32PFL3506H-12 - Manual (Page 41)

37
English
Access CAM services
1
Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 37).
2
Press OPTIONS.
3
Select [Common interface].
» Applications provided by the digital TV
service operator are displayed.
Note
•
This menu option is available only if the CAM is
inserted and activated correctly.
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
• Refer to the documentation from your service
operator on how to insert a smart card into the
Conditional Access Module.
Insert and activate a CAM
Caution
•
Be sure to follow the instructions described below.
Wrong insertion of a CAM may damage both the
CAM and your TV.
1
Switch off the TV and disconnect it from
the power outlet.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of the
TV.
3
Push the CAM in as far as it will go.
4
Reconnect the TV to the power outlet.
5
Turn on the TV and wait for the CAM to
be activated. This may take several minutes.
Do not remove the CAM from the slot
when in use — this action deactivates
digital services.
EN