Philips 32PFL3506H-12 - Manual (Page 44)

40
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Hear TV audio through another
device
If you connect an EasyLink- compliant device
that has speakers, you can get the most out of
those speakers if you listen to TV audio through
them.
If the connected device is HDMI-ARC
compliant, and you connect the device through
an HDMI ARC connector, you can output TV
audio through the HDMI cable. You will not
need an additional audio cable.
1
Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’ on
page 33).
2
Press .
3
Select [Setup] > [TV settings] >
[EasyLink] > [HDMI1 - audio out], then
press OK.
4
Select one of the following, then press OK.
• [On]: Hear the TV audio through
the connected EasyLink device. You
cannot hear the TV audio through
the TV speakers or through devices
connected through the digital audio
out connector.
• [Off]: Hear the TV audio through the
TV speakers, or through a device
connected through the digital audio
out connector.
5
Control playback with the TV remote
control play buttons.
Switch all EasyLink devices to standby
To save electricity, you can switch all unused
EasyLink-compliant devices to standby.
1
Press the green button.
2
Select [Switch off unused sources], then
press OK.
» All connected EasyLink devices are
switched to standby.
EN