Philips S9321-88 - Manual (Page 16)

Replacing the cartridge of the SmartClean System
- Replace the cleaning cartridge when the replacement symbol flashes
orange or when you are no longer satisfied with the result.
1 Press the button on the side of the SmartClean system (1) and lift
the top part of the SmartClean system (2).
2 Take the empty cleaning cartridge from the SmartClean system and
pour any remaining cleaning fluid out of the cleaning cartridge.
You can simply pour the cleaning fluid down the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull the seal off the cartridge.
5 Place the new cleaning cartridge in the SmartClean system.
6 Push the top part of the SmartClean system back down (‘click’).
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal shaving performance.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
ENGLISH
16