Philips S9321-88 User Manual

Page 23

Advertising
background image

Problem

Possible cause

Solution

The shaver does not

work when I press the

on/off button.

The shaver it still attached to

the mains. For safety reasons,

the shaver can only be used

cordlessly.

Unplug the shaver and press the on/off

button to switch on the shaver.

The rechargeable battery is

empty.

Recharge the battery (see chapter

‘Charging’).

The travel lock is activated.

Press the on/off button for 3 seconds to

deactivate the travel lock.

The shaver does not

shave as well as it used to.

The shaving heads are damaged

or worn.

Replace the shaving heads (see chapter

‘Replacement’).

Hairs or dirt obstruct the

shaving heads.

Clean the shaving heads(see chapter

‘Cleaning and maintenance’).
Clean the shaver thoroughly before you

continue shaving (see chapter ‘Cleaning

and maintenance’).

I replaced the shaving

heads, but the

replacement reminder is

still showing.

You have not reset the shaver.

Reset the shaver by pressing the on/off

button for approx. 7 seconds (see

chapter ‘Replacement’).

A shaving head symbol

has suddenly appeared

on the display.

This symbol is a replacement

reminder.

Replace the shaving heads (see chapter

‘Replacement’).

An exclamation mark has

suddenly appeared on

the display while charging.

The shaver is overheated.

Disconnect the shaver from the mains for

approx. 10 minutes.

An exclamation mark,

replacement reminder

and the cleaning reminder

have suddenly appeared

on the display.

The shaving heads are soiled or

damaged.

Replace (see chapter ‘Replacement’) or

clean the shaving heads (see chapter

‘Cleaning and maintenance’).

Water is leaking from the

bottom of the shaver.

During cleaning, water may

collect between the inner

body and the outer shell of the

shaver.

This is normal and not dangerous

because all electronics are enclosed in a

sealed power unit inside the shaver.

The SmartClean system

does not work when I

press the on/off button.

The SmartClean system is not

connected to the mains.

Put the small plug in SmartClean system

and put the adapter in the wall socket.

ENGLISH

23

Advertising
This manual is related to the following products: