Philips S9321-88 - Manual (Page 8)

, The travel lock symbol flashes and then lights up continuously.
The shaver is now ready for use again.
Note: You can also deactivate the travel lock by connecting the appliance to
the mains.
Replacing shaving heads
For maximum shaving performance, we advise you to replace the shaving
heads every two years.
- The appliance is equipped with a replacement reminder which reminds
you to replace the shaving heads. The replacement reminder lights up
white continuously and the arrows flash white. You hear a beep to
indicate you have to replace the shaving heads.
Note: After replacing the shaving heads, you need to reset the shaver by
pressing the on/off button for 7 seconds.
Exclamation mark
Blocked shaving heads
- If the shaving heads are blocked, the exclamation mark lights up orange
continuously. The replacement reminder and the cleaning reminder
flash white alternately and you hear a sound. In this case, the motor
cannot run because the shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving heads or replace
them.
Overheating
- If the appliance overheats during charging, the exclamation mark flashes
orange.
- When this happens, the shaver automatically switches off. Charging
continues once the appliance is back to the normal temperature.
ENGLISH
8