Philips S9321-88 User Manual
Page 18
3
Remove the shaving heads from the shaving head holder. Each shaving
head consists of a cutter and guard.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving performance is restored.
4
Clean the cutter and guard under the tap.
5
After cleaning, place the cutter back into the guard.
6
Put the shaving heads back into the shaving head holder.
Note: Make sure the projections of the shaving heads fit exactly into the
recesses.
7
Place the retaining ring holder on the retaining ring (1), place it
on the shaving head (2) and turn it clockwise (3) to reattach the
retaining ring.
Repeat this process for the other retaining rings.
8
Reattach the shaving head holder to the bottom part of the
shaving unit.
ENGLISH
18