Philips 4-Channel Sound Card User Manual
Page 45
Philips Seismic Edge
45
2)
Follow the soft-DVD players instructions for 4 speaker playback.
(Some players will not offer this feature)
3)
Play a DVD and Seismic edge will output the 4 channel Dolby
Digital downmix provided by the soft-DVD player.
4)
Seismic Edge supports Microsoft's standards for multichannel
playback however some soft-DVD players may not. If this mode
does not work with your soft-DVD player then use QMSS DVD
enhancement mode described in the preceding section.
If you only have stereo speakers:
1)
Make sure ''2 speakers'' is selected in the Seismic Edge control
panel settings tab.
2)
Select ''2D to 3D'' under ''2 speakers'' in the Seismic Edge con-
trol panel.
3)
Follow the soft-DVD players instructions for ''stereo'' playback. Do
not select the 3D option if it exists as it may interfere with the 2D
to 3D remapping feature. (Alternatively do not select 2D to 3D in
the Seismic Edge control panel and select the soft-DVD players
3D option to use the players built in 3D virtualization capability)
4) Play a DVD and Seismic Edge will virtualize surround effects
coming from the DVD.
Philips 4-ch-091100-11-40.qxd 2000/9/11 AM 11:39 Page 45