Philips 42PFL7682D-12 - Manual (Page 17)

13
English
7 Switching on the TV
for the first time
When you switch on the TV set for the first
time, a menu will appear on screen.
1
Press the Æ key to enter into
Language
mode and press the О п
keys to select your preferred language.
2
Press the key to confirm
selection.
3
Press the О п keys to select Country
or
Time Zone
and press the Æ key to
enter into
Country
or Time Zone
mode.
Caution
If you select a wrong country, the channel
numbering will not be according to the
standard for your country and you may not
receive all services or nothing at all.
Note
The Language can be selected independently
from the Country.
4
Press the О п keys to select your
preferred
Country
or Time Zone and
the key to confirm your selection.
5
Press the ï key to select Service
Scan
to scan the available analogue and
digital channels.
6
Press the key to start the
installation.
Note
If no digital channels are detected, press
key to switch to analogue mode.
Note
If at some point of time you decide to reset
to the factory default settings, press and hold
down the MENU key on the side of the
TV set for 5 seconds. A menu will appear on
the screen. Repeat steps 1 - 5 as if this was
the first time you have turned on the TV.
This activity will reset both the Digital and
Analogue mode to factory default settings.
English
Español
Français
Italiano
Magyar
Language
Country
Time Zone
Service Scan
Setup 11:28
Select your preferred language