Philips 42PFL7682D-12 - Manual (Page 22)

18
English
11 Test reception
This menu allows you to check the strengh
of the signal you are receiving through your
aerial.
1
From the digital mode, press the
key to display the setup menu.
2
Use the ï key to select Installation
and press the Æ key.
3
Use the ï key to select Test
reception
and press the Æ key. You
obtain an indication of the actual
programme frequency, the network
name, the signal quality and strength.
4
Use the Æ key to enter the Frequency
slot and use the to keys to
enter the frequency of the digital channel
you want to test. Use the Æ key to move
to the next character space.
If the test reception indicates that
the signal strength is indeed poor, you
can try improving, renewing, adjusting
or updating the aerial. It is however
advisable to contact a specialised aerial
installer in order to achieve best results.
5
After entering the frequency, use the
key to exit Frequency slot.
6
To return to previous menu, press the
Í key.
7
Press the key to exit the menu.
Frequency
Network name
Service lists
Service setup
Test reception
Setup 11:28
Test signal quality
Installation
Close
Signal quality
Signal strength