33 troubleshooting – Philips 42PFL7682D-12 User Manual

Page 53

Advertising
background image

49

English

33 Troubleshooting

Below is a list of symptoms you may encounter with your TV. Before you call for service,

make these simple checks.

Symptom

Possible solutions

No display on screen

• Check whether power cord is properly connected into the

mains socket and to your TV. If there is still no power,

disconnect plug. Wait for 60 seconds and re-insert plug.

Switch on TV again.

• Press the

key on the remote control.

Poor reception

• Check antenna connection to the TV and to the wall antenna

(snowy noise)

socket.

• Try manually adjusting your picture (see page 28).

• Have you chosen the right TV system? (see to page 28).

• Press the

key to check the signal strength.

No picture

• Verify if the supplied cables are connected properly (The

aerial cable to the TV, the other aerial to your recorder, the

power cables,....).

• Verify if you have selected the correct source.

• Verify if the child lock has been switched off.

No sound on

• Check whether the correct TV system is selected (see page 28).

certain channels

No sound

• Verify if the volume is not at the minimum.

• Check that the mute ( ) mode is not on. If mute mode

is on, press the

key to deactivate mute mode.

• Verify the connections between the optional equipment and

the TV.

Sound interference

• Try switching off any electrical appliances to prevent

interference, for example, hairdryer, vacuum cleaner.

Unable to understand

•

Press the

key to exit menu from screen.

the selected language
on screen to operate •

Press

the

key again to display menu.

set in digital mode

• Press the key to select the second item on the menu and

the key to enter into the next menu level.

• Press the key again and use the key to select the fifth

menu item.

• Press the key to enter into the next menu level.

• Press the О п keys to select correct language.

• Press the

key to confirm selection.

• Press the

key to exit menu.

TV not responding

• Move closer to the receiver at the front of the TV.

to remote control

• Check the placement of the batteries.

• Try changing the batteries.

Advertising