Philips PicoPix Pocket projector PPX2495 100 lumens with MP4 player - Manual (Page 10)

10 Philips · PPX2495
Installing or Changing the
Batteries of the Remote
Control
1 To access the battery, disengage the locking mecha-
nism (‚) and slide out the battery compartment
(ƒ).
2 Insert the new batteries into the battery compart-
ment with the positive and negative poles as shown
on the back of the remote control. Make sure the
polarities(+ and -) are aligned correctly.
3 Push the battery compartment back into the remote
control until the locking mechanism engages.
DANGER!
Risk of Explosion with Incorrect Type of
Batteries
Only use the CR 2025 type battery.
There is a risk of explosion if the incor-
rect battery type is used.
Note
Normally the batteries will last for around
one year. If the remote control stops working,
please replace the batteries. If the device is
not used for a long time, take out the batter-
ies. This will prevent leakage and possible
damage to the remote control.
The used batteries should be disposed of
according to the recycling regulations of your
country.