Philips PicoPix Pocket projector PPX2495 100 lumens with MP4 player - Manual (Page 14)

14 Philips · PPX2495
5 Memory Card / USB Storage Device
Inserting a Memory Card
1 Insert a memory card with the contacts facing
upwards into the SD/MMC slot at the back of the
device. Your device supports the following memory
cards: SD/SDHC/MMC.
2 Insert the memory card into the slot until it snaps
into position.
3 Press lightly on the memory card to remove it.
4 The memory card is ejected.
Connecting USB Storage
Device
1 Connect the USB adapter cable provided to the
mini-USB input on the reverse side of the device.
2 Only connect the USB storage device to the adapter
cable after the adapter cable has been connected to
the projector.
DANGER!
Prematurely remove a Memory
Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
In order to make sure that the device does
not access the memory card, press the ¿
key in the main menu until the symbol for
the internal memory has been selected.
Note
USB Storage Device with Mini-USB
Connector
Ensure that the adapter cable is connected
to the projector and not to the USB stor-
age device. The signal is switched correctly
between the computer connection and the
USB storage device only when using the
adapter cable.