Philips 221T1SB1-00 - Manual (Page 11)

9
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
CH +/- at the side of the TV.
Switch channels
Press • CH ^/v on the remote control or
CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Use the channel grid. •
Note
When you use a favourite list, you can only •
select those channels in the list.
4
This section helps you perform basic TV
operations.
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press •
POWER at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press • (Standby-On) on the remote
control.
The standby indicator switches to red. »
To switch off
Press • POWER at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
English
EN
Use your LCD
Monitor with
HD TV