7 troubleshooting, Tv channel issues, Picture issues – Philips 221T1SB1-00 User Manual

Page 17: General tv issues

Advertising
background image

15

TV channel issues

Previously installed channels do not appear in

the channel list:

Check that the correct channel list is

•

selected.

No digital channels were found during the

installation:

Check that the TV supports DVB-T or

•

DVB-C in your country. See the listed

countries on the back of the TV.

Picture issues

The TV is on, but there is no picture:

Check that the antenna is properly

•

connected to the TV.

Check that the correct device is selected

•

as the TV source.

There is sound but no picture:

Check that the picture settings are

•

correctly set.

There is poor TV reception from an antenna

connection:

Check that the antenna is properly

•

connected to the TV.

Loud speakers, unearthed audio devices,

•

neon lights, high buildings and other large

objects can influence reception quality.

If possible, try to improve the reception

quality by changing the antenna direction

or moving devices away from the TV.

If reception on only one channel is poor,

•

fine tune this channel.

There is poor picture quality from connected

devices:

Check that the devices are connected

•

properly.

Check that the picture settings are

•

correctly set.

The TV did not save your picture settings:

Check that the TV location is set to the

•

home setting. This mode offers you the

flexibility to change and save settings.

7 Troubleshooting

This section describes commonly encountered

issues and accompanying solutions.

General TV issues

The TV does not switch on:

Disconnect the power cable from the

•

power outlet. Wait for one minute then

reconnect it.

Check that the power cable is securely

•

connected.

The remote control is not working properly:

Check that the remote control batteries

•

are correctly inserted according to the

+/- orientation.

Replace the remote control batteries if

•

they are flat or weak.

Clean the remote control and TV sensor

•

lens.

The standby light on the TV blinks red:

Disconnect the power cable from the

•

power outlet. Wait until the TV cools

down before reconnecting the power

cable. If the blinking reoccurs, contact

Philips Consumer Care.

You forgot the code to unlock the TV lock

feature

Enter ‘5351’.

•

The TV menu is in the wrong language

Change the TV menu to your preferred

•

language.

When turning the TV on/off/to standby, you

hear a creaking sound from the TV chassis:

No action is required. The creaking sound

•

is normal expansion and contraction of

the TV as it cools and warms up. This

does not impact performance.

English

EN

Advertising