Philips VOIP0801B-37 - Manual (Page 9)

9
US
Connect
To connect your phone :
1. Unwind the USB cable from your phone.
2. Connect the USB connector directly to a USB slot on your computer.
Install
VOIP080 driver is provided in the enclosed CD. Please plug in USB
connector to your computer before installation starts.
To install the VOIP080 driver :
1. Insert the Installation CD into the computer's CD ROM (or DVD
ROM) drive.
2. The installation program will start automatically.
3. Follow the instructions on the screen.
4. Click on Quit.
5. Remove the installation CD from CD ROM (or DVD ROM) drive.
Note : Please make sure the USB connector is NOT plugged in
before installation starts.
Note : No battery is required. Power for the phone is provided by
the computer through the USB cable.
TIP : If for some reasons the installation does not start automatically:
- Click START and then Run on Windows.
- Type explorer and navigate to the CD ROM (or DVD ROM) drive.
- Double-click on SetupWizard.exe.
Note : If your operating system is Windows 2000, you need to
restart your computer to complete the installation.
Note : The VOIP080 driver should auto-start if Autorun VOIP080
Driver at Startup option is checked during installation.
Connect and install