Philips DC177-37 - Manual (Page 16)

16
English
Basic Functions
Adjusting volume and sound
1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜
Display shows the volume level
VOL and a
number from MIN, 1-31, MAX.
2
Press DSC repeatedly to select the desired
sound effect: POP / JAZZ / CLASSIC / ROCK.
3
Press DBB (or DBB/LOUD on the remote
control) to switch bass enhancement on or off.
➜ Display shows if the DBB is activated.
4
Press and hold DBB/LOUD on the remote
control to enable/disable LOUDNESS feature.
● LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
5
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Switching the system on
●
Press STANDBY ON or SOURCE (or 2on
the remote control).
➜ The system will switch to the last selected
source.
● Press iPod, USB, FM or AUX on the remote
control.
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY ON on the system (or 2on
the remote control).
➜ The display displays clock time, or --: -- is
displayed if clock time is not set.
➜ The volume level (up to a maximum volume
level of 12 and up to a minimum level of 4),
interactive sound settings, last selected source
and tuner presets will be retained in the player's
memory.
To switch the system to Eco-power
standby mode
● Press and hold STANDBY ON (y on the
remote control) for more than 2 seconds.
➜ The display will go blank.
➜ The Eco power light will be on.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a USB playback has
ended and no control is operated.
PG 001-026_DC177_37-Eng 2008.2.28, 10:10 16