Philips DC177-37 - Manual (Page 25)

English
25
The remote control does not function
properly.
The time is not working.
The Clock/Timer setting is erased.
The USB device doesn’t play on my
DC177
✔ Select the source (iPod or FM, for example)
before pressing the function button.
✔ Reduce the distance between the remote
control and the system.
✔ Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔ Replace the batteries.
✔ Point the remote control directly towards the IR
sensor.
✔ Set the clock correctly.
✔ Press TIMER/SLEEP to switch on the timer.
✔ If recording or tape dubbing is in progress, stop
recording.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔ It is not set in the USB mode. Select USB mode.
✔ The device is not securely connected to
DC177’s USB port. Re-connect the device, and
make sure that the device is powered on.
✔ The device is not supported by DC177, or the
audio file format stored on the device is not
supported by DC177. Use a compatible device/
playable audio file format.
Troubleshooting
Problem Solution
PG 001-026_DC177_37-Eng 2008.2.28, 10:10 25