Philips DC177-37 - Manual (Page 22)

22
English
Clock/Timer
Notes:
– Timer is not available in AUX mode.
– If iPod/USB source is selected and no compatible
iPod/USB device is plugged, FM will be selected
automatically.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER/SLEEP on the remote control once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press TIMER/SLEEP on the remote control
once or more.
➜ Display shows and one of the sleep time
options in sequence: 60, 45, 30,15, 0, 60... if
you have selected a time.
● To deactivate, press TIMER/SLEEP on the
remote control once or more until “
0“ is shown,
or press STANDBY ON on the system (or
2on the remote control).
➜ disappears from the display.
Viewing clock
● The clock (if it is set) is shown in normal standby
mode.
To view the clock in any sound source
(ccor FM for example )
● Press briefly DISPLAY/CLOCK.
Setting the clock
1
In standby mode, press and hold DISPLAY/
CLOCK for 2 seconds.
➜ 12 hour or 24 hour mode is displayed.
2
Press PROGRAM on the remote control to
select between 12 hour and 24 hour display.
➜ The clock digits flash.
3
Press TUNING а / б (or S / T on the
remote control) to set the hours.
4
Press н/ л on the set (or ALBUM/PRESET
+/- on the remote control) to set the minutes.
5
Press DISPLAY/CLOCK to confirm the time.
Setting the timer
● The system can be used as an alarm clock,
whereby the iPod or FM or USB is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1
In standby mode, press and hold TIMER/
SLEEP about 2 seconds on the remote control.
2
Press SOURCE (or iPod/USB/FM on the
remote control) to select sound source.
3
Press TIMER/SLEEP to confirm your desired
mode.
➜ The clock digits flash.
4
Press TUNING а / б (or S / T on the
remote control) to set the hours.
5
Press н/ л on the set (or ALBUM/PRESET
+/- on the remote control) to set the minutes.
6
Press TIMER/SLEEP to confirm the time.
➜ The timer is now set and activated.
PG 001-026_DC177_37-Eng 2008.2.28, 10:10 22