Philips Clock Radio AJ3600 - Manual (Page 14)

SLEEP (See
6)
About Sleep
This set has a built-in sleep timer, which enables the radio to be automati-
cally switched off after a set period of time. There are four sleep time
options.
Setting and switching off SLEEP
1 Within 1 second, press ALARM RESET / SLEEP twice until the display
shows SLEEP and SL: 60.
™ The radio is automatically switched on and tunes to the last station.
2 To select other sleep time options, press ALARM RESET / SLEEP again
within 1 second before the display returns to clock time.
™ The display shows in sequence: SL : 30, SL : 15 and OFF.
3 To cancel sleep, press either:
– RADIO ON/OFF
– REPEAT ALARM / BRIGHTNESS CONTROL .
– ALARM RESET / SLEEP once or more until SLEEP disappears
from the display.
USING THE PROJECTION
You may have the experience of looking for a clock in the darkness.
With this projection feature, you can conveniently project the clock time
onto a surface e.g. walls ceiling (furniture, glasses not recommended).
1 Press PROJECTION ON/OFF to switch on.
™ The Projection lens lights up red.
2 Turn the Projection lens wheel (maximum 180 degree left or right) and
also the set, if necessary, to find a suitable projection surface. (See
7)
3 To change the projected time upside down, press REVERSE
PROJECTION.
4. To change the projection slightly to a different angle, turn the ROTATE
PROJECTION ball (maximum 60 degree left or right.).
5. Press PROJECTION ON/OFF to switch off.
™ The Projection lens goes out.