Philips Clock Radio AJ3600 - Manual (Page 9)

8 Battery compartment
– for 4 batteries, type R6, UM3, AA
9 RESET
– press if the set / display does not react to operation of any button
BACK PANEL (See
2)
1 TUNING +/-
– tunes to radio stations
2 VOLUME
– adjusts the sound level
3 DC 7.5V
– socket for AC/DC 7.5V adapter
4 Pigtail
– improves FM reception
LEFT & RIGHT PANEL (See
3)
1 Projection lens
2 REVERSE PROJECTION
– turns time/hour digits upside down
(AC-powered only)
3 PROJECTION ON/OFF
– switches the projection on/off
4 ROTATE PROJECTION
– adjusts projection slightly to a different angle
5 SET ALARM 1 / PRESET 1
– sets ALARM 1 time
– stores, recalls and shows station 1
6 SET ALARM 2 / PRESET 2
– sets ALARM 2 time
– stores, recalls and shows station 2
7 MINUTE + / PRESET 3
– adjusts the minutes for clock and alarm times
– stores, recalls and shows station 3
8 SET TIME / PRESET 4
– sets the clock time
– stores, recalls and shows station 4
9 HOUR + / PRESET 5
– adjusts the hours for the clock and alarm times
– stores, recalls and shows station 5
POWER SUPPLY
Batteries (not included)
1 Open battery door and insert four batteries (preferably PHILIPS POWER
LIFE or alkaline), type R6, UM3 or AA as indicated in the compartment.
2 Remove the batteries from the set if they are exhausted or not be
used for a long time.
• When you replace batteries, the preset stations, alarm and clock time
settings can be stored for up to 3 minutes. (see 'Self-Powered Back-Up').
Batteries contain chemical substances, so they should be disposed
of properly.