Bosch TCA 6001 UC - Manual (Page 14)

14
q Push down sleeve a on nozzle 13.
q Fill the cup approx.
1 /
3
full of milk.
q Immerse nozzle 13 approx. 1 cm into the milk.
q Slowly rotate function selector 2 to =.
i
The appliance now heats up for approx. 20 seĆ
conds. dflashes on display 3. Then the milk is
frothed. The dsymbol is lit on display 3.
d WARNING d
Risk of scalding!
When the function selector is set
to =, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q Slowly rotate the cup.
q End the process by rotating the function selector 2
back to z .
Note: When nozzle 13 has cooled down, clean immeĆ
diately. Dried residue is difficult to remove.
Tip: Preferably use semiĆskimmed milk.
q Push up sleeve a on nozzle 13.
q Immerse nozzle 13 deep into the liquid which is to
be heated.
q Slowly rotate function selector 2 to =.
i
The appliance now heats up for approx. 20 seĆ
conds. dflashes on display 3. Then the liquid is
heated. The d symbol is lit on display 3.
d WARNING d
Risk of scalding!
When the function selector is set
to =, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector 2
back to z .
Note: When nozzle 13 has cooled down, clean immeĆ
diately. Dried residue is difficult to remove.
Steam for frothing milk
Steam for heating
drinks