Bosch TCA 6001 UC - Manual (Page 23)

23
q Set function selector to z .
q Wipe the outside of the nozzle after it has cooled
down.
q Dismantle the nozzle to clean thoroughly.
Proceed as follows:
q Unscrew the nozzle with a coin.
q In particular, clean the tip of the nozzle with
a brush and pointed implement.
q Clean all parts with hot water and detergent,
rinse and dry (dishwasherĆproof).
Descaling the appliance 6.
If the illuminated ring on the descaling button
4 9 is lit red and k is indicated on display 3
when the appliance is switched on, the appliance
must be descaled immediately. If the appliance is not
descaled as instructed, it may be damaged.
Note:
If you use a filter 22 and the message k is
displayed, the filter is NOT activated in the settings.
Follow the instructions Change settings/
programming - Filter".
If the appliance is always operated with an inserted
filter, it should be descaled once or twice a year,
even if the descale message is not displayed.