Bosch TCA 6001 UC - Manual (Page 25)

25
q Place an appropriately large receptacle under
nozzle 13.
q Set function selector 2 to 0.
Note: The appliance is automatically descaled, 3
lights up aon display. Descaling solution flows at
intervals into the receptacle. Wait for the next
symbolg on display 3 (approx. 10 minutes).
q Set function selector 2 to
z .
Note:The appliance is automatically descaled, a
lights up on display 3. Descaling solution flows at
intervals into the tray 24. Wait for the next symbol f
on display 3 (approx. 10 minutes).
q Empty and reĆinsert tray 24 and coffee dregs tray
23.
q Rinse out the water tank 21, fill with fresh water up
to max and reĆnsert.
q Empty the receptacle and place back under the
nozzle 13.
q Set function selector 2 to 0.
Note: The appliance is automatically descaled, a
lights up on display 3. Water flows at intervals into the
receptacle.
Wait for the next symbol g on display 3
(approx. 4 minutes).
q Set function selector 2 to
z .
Note: The appliance is automatically descaled, a
lights up on display 3. Water flows at intervals into the
tray 24.
Wait for the next symbol f on display
3 (approx. 4 minutes).
q Empty tray 24 and coffee dregs tray 23.
q Clean and dry contacts 26.
q ReĆinsert tray 24 and coffee dregs tray 23.
Note: The appliance is automatically rinsed.
q Wipe splashes off the nozzle 13 and appliance.
i
The descaling process is complete.
The illuminated ring on descaling button 4 9
goes out.
The appliance is ready for use again.