Philips 231T1LSB-00 - Manual (Page 14)

12 EN
Note
‡ If you cannot locate your remote control and
want to switch on the TV from standby, press
CH +/- at the side of the TV.
Switch channels
‡ Press CH ^/v on the remote control or
CH +/- on the side of the TV.
‡ Enter a channel number using the
Numeric buttons.
‡ Use the channel grid.
Note
‡ When you use a favourite list, you can only
select those channels in the list.
5. Start to use
This section helps you perform basic TV
operations.
Switch your TV on/off or to
standby
To switch on
‡
If the standby indicator is off, press
POWER at the side of the TV.
‡ If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
‡
Press (Standby-On) on the remote
control.
È The standby indicator switches to red.
To switch off
‡
Press POWER at the side of the TV.
È The standby indicator switches off.
Tip
‡ Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.