Philips Cordless telephone SE4502B - Manual (Page 41)

39 Use more of your phone
8.12 Clock and Alarm settings
This feature allows you to set the date,
time and alarm settings for your phone.
8.12.1 Set Date and Time
1
Press
m in idle mode, scroll n to
Clock & Alarm, and press
o
Select.
2
Set Date/Time is highlighted.
Press
o Select.
3
The last stored date and time are
displayed. Enter the current time
and current date (HH:MM DD/MM/
YY). Press
u to move the cursor
left, or press
d to move it right.
If using the 12 hour format, just
after setting the minutes, use
* to
switch between AM and PM.
4
Press
o OK.
• A validation tone is emitted and
the screen returns to the idle
mode.
You can change the format as shown in
the next section.
8.12.2 Set Time and Date Format
8.12.2.1 Set Time Format
1
Press
m in idle mode, scroll n to
Clock & Alarm, and press
o
Select.
2
Scroll
n to Set Format and press
o Select.
3
Time Format is highlighted in the
display. Press
o Select, then
scroll
n to select 12hours or
24hours.
4
Press
o Select to select the
option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
8.12.2.2 Set Date Format
1
Press
m in idle mode, scroll n to
Clock & Alarm, and press
o
Select.
2
Scroll
n to Set Format and press
o Select.
3
Scroll
n to Date Format and
press
o Select.
4
Scroll
n to select DD/MM or
MM/DD and press
o Select to
select the option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
8.12.3 Set Alarm
1
Press
m in idle mode, scroll n to
Clock & Alarm, and press
o
Select.
2
Scroll
n to Alarm and press o
Select.
3
Scroll
n to Off, On Once, or On
Daily and press
o Select.
4
If you select On Once or On
Daily, enter the time (HH-MM) for
the alarm. (If using the 12 hour
format, you can switch between AM
and PM by pressing
*.) Press o
OK to confirm.
Note