Philips Cordless telephone SE4502B - Manual (Page 51)

49 Network Service
The default setting for first ring detection
is On. The setting automatically switches
to Off when you receive a call containing
caller line identification. However, this
occurs only if you do not first manually
change the setting. (It does not change
automatically
if you manually change the first ring
setting even once.)
10.14 Default Settings
11 Network Service
The network service functions provide a
convenient way for you to access some
network provider services. Subscriptions
are required in order to benefit from
these services. Contact your network
provider for details. Depending on your
subscribed network, some of the
services and menus described in this
Note
Parameter Default Value
Ring Volume Level 3
Ring Tone Ring 1
Earpiece
Volume Level 3
Speaker
Volume Level 3
Key Beep On
Display
Language English
Wallpaper Wallpaper 1
Color
Theme Color 1
Display
Contrast Level 3
Backlight
Time 20 Seconds
Auto Hang-
Up On
Handset
Name Philips
Time/Date
Format MM/DD 12Hours
Time/Date 00:00 01/01/2008
Set Alarm Off
Alarm Tone Bell 2
Dial Mode Tone
Flash Time Long
PIN Code 0000
Call Barring Off
Call Barring
Number Cleared
XHD Sound On
Easy Call Off
Easy Call
Number Cleared
Auto Prefix Cleared
Set First Ring On
Phonebook
Memory
After a reset,
phonebook is
maintained as it was just
before the reset
Redial
Memory Cleared
CLI Memory Cleared
Network
Service
Empty (no preset
numbers)
Auto
Conference On
Parameter Default Value