Philips HF3329-60 - Manual (Page 19)

18
Should I use the goLITE BLU every day?
You should use the goLITE BLU daily, especially during the winter months. Many people find that they
don’t need the light during the summer. Others use it year-round because they spend most of their time
indoors and don’t typically get the right kind of light signals to regulate circadian rhythms properly.
Can the light cause harm to children or pets?
No. The lights are safe around children and pets. The lights will actually draw many pets to sit by it.
Can I use the goLITE BLU more than once a day?
For most people, it is sufficient to use the goLITE BLU once a day. Keep in mind that using the goLITE
BLU too late in the evening may adversely affect your sleep.
How long do the LEDs last?
Under normal usage, the LEDs are rated for 10,000 hours of use, which at 30 minutes per day all year
round equals over 50 years of life.
What if one or more LEDs stop working prematurely?
In the unlikely event that one or two LEDs fail prematurely, the effectiveness of your goLITE BLU will
not be diminished. You can continue to use your goLITE BLU normally. However, if several LEDs stop
functioning, you should probably have your goLITE BLU repaired to ensure that you are receiving the
correct treatment dosage. For more information, refer to your goLITE BLU warranty card.
What is DEMO on the display screen?
This is the Demonstration mode that is used to display the goLITE BLU at point-of-sale locations.
If your goLITE BLU happens to be in this mode, DEMO will appear on your display screen. You will
not need to be in this mode. While the goLITE BLU is off, press and hold the ON/OFF button for 10
seconds. The goLITE BLU will turn on and the word DEMO will clear from your display screen.
How do I use the reset button?
The goLITE has a reset button located in the stand storage cavity on the back of the unit. If the goLITE
locks up or is not working correctly, you can reset the device by inserting the end of a paper clip into
the reset button hole. The goLITE will reset and the memory contents will be cleared.
FA
Q