Philips 201B4574 User Manual

Page 47

Advertising
background image

No Picture

(Power LED is green)

Make sure the Brightness and Contrast controls are set correctly.

●

Make sure the monitor cable is properly connected to your
computer.

●

Check to see if the monitor cable has bent pins.

●

The screen says
"CONTROL MENU IS
LOCKED" when you
press the OK knob

Press the OK knob and hold for around 15 seconds to release
the lock.

●

Picture is too large or too
small

Adjust the Horizontal Size and/or Vertical Size. Refer to the On
Screen Display chapter for details.

●

Edges of the picture are
not square

Refer to the Adjust Shape item in On Screen Display chapter for
details.

●

Color appears blotchy

Remove any nearby magnetic objects.

●

"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.

●

Face the monitor toward the East for the best picture quality.

●

Missing one or more
colors

Make sure the monitor cable is properly connected to your
computer.

●

"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.

●

Check to see if the monitor cable has bent pins.

●

Check the Color Temperature. Refer to the Color Temperature
item in On Screen Display chapter for details.

●

Dim Picture

Make sure the Brightness and Contrast controls are set correctly.

●

"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.

●

Picture has double image

Eliminate the use of extension cables and/or video switch box.

●

Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.

●

Picture is not sharp

Low down the Contrast and/or Brightness level.

●

Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.

●

"Degauss" your monitor. Refer to the Degauss item in On Screen
Display chapter for details.

●

Unstable picture

Increase the refresh rate of video signal at least to 75Hz. Refer to
the Quick Start Guide or contact your computer vender for
details.

●

Adjust Moire to zero. Refer to the Adjust Moire item in On Screen
Display chapter for details.

●

For further assistance, refer to the

Consumer Information Centers

list to contact your local Philips

distributor.

Troubleshooting

file:///D|/rita/LF2/LF2/highendnew/multi_manual/english/201B/SAFETY/saf_troub.htm (2 of 3) [1/7/2002 10:29:25 AM]

Advertising