Philips 201B4574 - Manual (Page 6)

• Video dot rate 261 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal
levels
0.7 Vpp
• Sync input signal
Separate sync
Composite sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K
degrees
x = 0.283 / y = 0.297
• at 6500 K
degrees
x = 0.313 / y = 0.329
• at 5500 K
degrees
x = 0.332 / y = 0.347
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras,
monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can
rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined
setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to go
to Color temperature and press OK again. Then move the down button to go to sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of
these, the monitor will exit the sRGB mode and go to a color temperature setting of 9300K.
For more information on sRGB, please visit: www.srgb.com
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Automatic Power Saving
201B Product Information
file:///D|/rita/LF2/LF2/highendnew/multi_manual/english/201B/PRODUCT/PRODUCT.HTM (2 of 4) [1/7/2002 10:28:50 AM]