InnoMax Scape Adjustable Power Base - Manual (Page 6)

PowerBASE Owners Manual
ACOUSTICS
LIFTING/LOWERING MECHANISMS
The lift/lower feature will emit a minimal
humming sound during operation. This is
normal.
During PowerBASE operation, the lift arm
wheels make contact with the platform
support of the bed. This applies slight
tension on the moving components and
resonance is reduced to a minimum level.
If excessive noise or vibration is
experienced, reverse the movement
action (up or down) of the bed with the
hand control. This should realign the bed’s
activating mechanisms to the proper
operational position.
MASSAGE OPERATION
The massage feature will emit a minimal
tone during operation. This is normal.
When the massage level is increased,
motor resonance will intensify
accordingly.
LOCATION ENVIRONMENT
The level of sound experienced during
PowerBASE operation is directly related to
the location environment. For example,
when a bed is located on a hardwood floor
with the massage feature in operation, a
vibrating tone will be audible. To minimize
this resonance, place a piece of carpet—or
optional rubber caster cups—under each
leg or caster of the bed. See the accessory
sheet included with this product for
rubber caster cup order information.
It is possible to experience vibration or
noise from the headboard brackets,
headboards or footboards if mounting
bolts are not firmly tightened.
4