Hale HFM - Manual (Page 5)

HFM Series
Front Mount Fire Pumps
(GPM — U.S. gallons per minute)
Hale Front Mounts provide
pump-and-roll capability with full
NFPA 1901 complialnce. They
have single-stage design for
ease of operation. Best of all,
they’re built by Hale.
For pump-and-roll grass fire
fighting or drafting from ponds
and streams, there are no
pumps like Hale Front Mounts.
They are extremely rugged, with
a range of capacities to meet
your needs. And they are built
with the same unique design
features that have made Hale
the leader in the fire-fighting
industry.
STANDARD FEATURES
• Bronze impeller,
individually balanced and
matched with renewable
bronze clearance rings.
• Electric rotary vane,
positive displacement
priming system with single
panel control activation.
• Bronze fitted ball-type
“droop” discharge valves
with twist-to-lock handle
feature to gate valve in any
position.
NFPA 1901 STANDARD RATINGS
HFM 75 750 GPM @ 150 PSI
2850 LPM @ 10.3 BAR
HFM 100 1000 GPM @ 150 PSI
3785 LPM @ 10.3 BAR
HFM 125 1250 GPM @ 150 PSI
4730 LPM @ 10.3 BAR
HFM 150 1750 GPM @ 150 PSI
5678 LPM @ 10.3 BAR
• Corrosion-resistant stainless
steel pump shaft.
• Oversized deep-groove ball
bearings for maximum
efficiency and long life.
• Maintenance-free, self-
adjusting mechanical seal.
• Oversized relief valve with
pressure control valve and
light.
Other standard features include
chrome-plated discharge and
suction caps, speed counter
connection and throttle indicator
lights.
Hale pumps go where the action
is. And when they get there,
they deliver. That’s why more
firefighters around the world rely
on Hale Front Mounts.