Off Road Unlimited 60013 2001-08 GM 2500-3500 HD 4WD 4-Link Coil-Over w/Solid Axle Conversion Kit - Manual (Page 11)

ORU- GM 4 Link Coil-Over Conversion Kit #60013
Photo 1b
Photo 1c
Passenger sid e sho wn
*NOTE:
4WD models only. You will need to remove the steering box and cut the differential mounting bracket
from the inside driver side frame rail and grind smooth.
Part Two: Shock Tower & Support Installation-
4) Starting on the driver side, measure and mark 2” from front of rear upper control arm mount
(photo 2). Clamp driver side coil over bracket #60013-2 to frame. Be sure bracket is flush with bottom of
frame (photo 3).
offroadunlimited.com
page 10
Rear lower
mount r emoval
This is where
optional weld-
on filler pl ate
attac hes