Off Road Unlimited 60013 2001-08 GM 2500-3500 HD 4WD 4-Link Coil-Over w/Solid Axle Conversion Kit - Manual (Page 33)

ORU- GM 4 Link Coil-Over Conversion Kit #60013
56) Pull output shaft back slightly to relieve tension on drive chain. Remove drive chain and set aside
(photo 42).
Photo 42
57) Tap output shaft out of seal and set aside.
58) Drive front output seal from case from inside.
59) Remove inner bearings from output shaft. Be sure to note bearing depths and re-install in same
position after machine work. Remove steel plug from inside shaft and discard. Machine 1.5" from shaft as
shown in photo 43.
Photo 43
offroadunlimited.com
page 32
Before
After