ARB RD93 - Manual (Page 26)

5 Mounting & Connecting the Electrical System
24
5.2 Wiring the Actuator System
5.2.1
Connection to an ARB Air Compressor
When wiring the Air Locker actuator switch(es) and solenoid(s) to an
ARB Air Compressor, all connections can easily be set up directly from
the supplied wiring loom (Fig.17.).
Refer to your ARB Air Compressor Installation Guide for details
on configuring your installation.
Figure 17.
Figure 18.
SWITCH
TERMINAL
IDENTIFICATION
UP
ARB AIR COMPRESSOR WIRING LOOM