ARB RD93 - Manual (Page 5)

2 Removing the Existing Differential
3
IMPORTANT :
BEFORE ATTEMPTING TO DISMANTLE YOUR VEHICLE FOR THIS
INSTALLATION, PLEASE READ THIS INSTALLATION GUIDE IN ITS
ENTIRETY, AS WELL AS ALL APPLICABLE SECTIONS OF YOUR VEHICLE
MANUFACTURER’S SERVICE MANUAL.
1.1 Pre-Installation Preparation
This booklet is to be used in conjunction with your vehicle manufacturer’s
service manual. ARB endeavors to account for every possible variation
in vehicle model when publishing its installation guides, and guides are
updated regularly as new model information becomes available, however,
the rapid and globally varied release of some vehicles makes it difficult to
insure that your vehicle model has been accurately accounted for. In the
case of any technical discrepancies between this guide and your service
manual, we strongly advise that you adhere to the specifications and
techniques as documented in your service manual.
Although your ARB Air Locker comes complete with all the step by step
instructions you will need to supplement your vehicle manufacturer’s
service manual and install your new differential, ARB recommends that
you have your Air Locker installed by a trained professional. Many ARB
distributors around the world have been fully instructed in Air Locker
installations by ARB, and have gained a wealth of experience and skill
from years of performing similar installations.
Once you begin this installation your vehicle will be immobile until all
steps of the installation are complete. Make sure your Air Locker kit is the
correct model for your vehicle and that it contains all of the parts listed on
back cover of this booklet. Also be sure you have appropriately equipped
yourself with all the necessary tools, parts, and materials to complete this
installation (see Section 1.2 Tool-Kit Recommendations), and that you
have allowed for an appropriate amount of vehicle down time.
HINT :
Place a mark inside each of the symbols as
you complete each step. It is very important NOT to miss
any of the steps!