ARB RD99 - Manual (Page 24)

3 Installing the Air Locker
22
3.10 Reinstalling the Differential and Axles
Reinstall the third member to the differential housing according to
your vehicle service manual.
Reconnect the drive shaft.
Inspect the condition of the axle seals and replace if necessary.
Insert both axles fully into the housing, engaging splines, and then
gently tap them inward.
NOTE : Be careful not to damage the axle shaft oil seals when
installing the axle. Support the axle’s entire weight
where possible.
Torque down the axle bolts to manufactures specifications.